Mini Beam HP90
High Efficiency Fluorescent

The new Mini Beam HP90 is the newest addition to the CFI Fluorescent brand of products. The HP90 is designed to offer today’s needs for volumetric lighting while at the same time exceeding LEED requirements for reducing energy consumption.

Something Different
The HP90 is a fresh looking, uniquely designed product. The HP90 should not be considered a “me too” product to as it has its own distinctive appearance and design that provides even illumination and balanced brightness in any area.

It’s Easy Being Green
There is a remarkable energy and efficiency story to be told with this product, the benefits of which makes the HP90 an excellent choice when choosing an architectural designed product for LEED compliant office spaces. Interesting lighting needs are complex, so lighting luminaires and lighting control systems must be flexible enough to meet all the requirements of a facility, including expansion plans, remodeling projects, tenant demands and individual preferences. HP90 and iGEN can provide the solution.
HP90 offers a variety of integrated technologies — from standard T5 ballast, bi-level ballast, daylight sensing, occupancy sensing, and conventional dimming to iGEN systems — to create a space where the illumination is people friendly and a plus to the ergonomic environment while saving energy. A typical HP90 layout can provide 56 maintained footcandles of balanced brightness illumination using only .68 watts per square foot, which is 47.6 % better than the LEED requirement of 1.3 watts per square foot. Integrating energy-efficient HP90 luminaires in an iGEN network lets you score up to 6 LEED points towards achieving your sustainability goals. For more information on the benefits of Lightolier iGEN technology, in combination with HP90 and other luminaires, visit www.canlyte.com/igen.

Features

ULM Sensor
Motion (ULM) Module sensor integrates with recessed lighting luminaires. The clean design allows it to blend in nicely with the ceiling system and lighting luminaire. Although shown here with a 2' x 4' HP90, it can be also be used with any Lightolier 2' x 4' or
2' x 2' recessed luminaire.

The ULM Module comes packaged complete with the appropriate sensor and can be easily installed and connected to the end of the lighting luminaire. It will accommodate most manufacturers’ daylight, motion or combination sensors in either line or low voltage, where applicable.

The ULM Module clamps to the ceiling “T” bar and then the luminaire is dropped in place. The same ULM Module will fit either standard or slot grid ceilings. Plug-in quick connectors are used for electrical connection of module to luminaire.

Housing encloses electrical connections — line or low voltage. Tile is notched and dropped in place.